Automatic Carton Packing Machine

Feel free to contact our expert!

MG is the top manufacture factory of packing line specialized for automatic carton packing line. Automatic unpacking machine is also called carton plate opening, the bottom of the box according to certain procedures, and sealed with tape to the packing machine after the special equipment.
Automatic packing machine will automatically arrange the packaging plastic,into the open carton,and complete the action of self-adhesive sealing packing equipment,all the action is fully automatic.
The automatic sealing machine adopts the adhesive tape to seal the carton, economical,fast and easy to adjust,can complete the upper and lower sealing action at one time,can also use the printing tape,but also can improve the product image,is the first choice of automatic packaging enterprises.
MG,a leading global packing machine manufacturer and supplier, develop a totally customized carton erector /packing machine/automatic sealing machine for you.

TAGS

carton machine,case unpacking machine,case unpacker,case erecting machine

l Automatic unpacking machine

1.Product introduction:

This machine adopts vertical storage cardboard, and can be replenish at any time.It is suitable for cartons of various sizes.Automatically open and seal the bottom.One time can be completed carton suction, unpacking, molding, folding, sealing and other packaging processes.If you need to change the carton size, manually adjust it, only need 1-2 minutes;The whole machine adopts continuous system, mechanical operation is accurate.The unpacking machine adopts PLC+ touch screen control, convenient operation, is an essential assembly line equipment for automatic scale production.This machine has the characteristics of stable performance, reliable quality,strong applicability, high packing efficiency, long service life and high degree of automation.Can also be customized according to customer needs.The carton machine is widely used in food, medicine, beverage, tobacco, daily chemicals, toys, electronics and other industries.

2.Carton packing machine Technical parameters

Minimum carton size:L200*W200*H100mm customized

Maximum carton size:L1300*W600*H400mm customized

Unpacking speed:15 cases /min

Size:L3600*W3200*H1250mm

Power supply:380V 50Hz

Air source:8kgf/cm2,450nl/min

Power:≤0.4KW

Packaging tape width:W48, 60, 75mm

Weight:700KG

l Automatic carton packing machine

Single column packing machine is a new packing machine developed by our company according to the market demand. This packing machine can be applied to a variety of small and medium-sized production lines, relatively large servo packing machine robot packing machine, not only can also be applied to a variety of bottles, cans, bags and other products, the most important is that it has servo packing machine and other large packing equipment of high stability. The packing machine for small and medium-sized enterprises, is a production line to reduce labor and improve production efficiency of a big weapon.

Material buffer chain (belt) and material straightening device can design reasonable and reliable buffer according to the user's production speed toensure smooth and stable packing.

The whole line after deep intelligent adjustment, high degree of automation, suitable for high speed unmanned production.

l Equipment components

Automatic carton packing machine,automatic packing machine,automatic sealing machine power drum conveying line (conveying cartons) electrical control system.

l Equipment Operation Process:

1.The carton unpacking machine unpacks and seals the bottom of the carton through the power drum conveying line and sends it to the packing machine

2.The packing machine will automatically pack the goods.After packing, it will enter the sealing link through the conveying line

3.Automatically seal the carton on the page through the automatic page opening and sealing machine

4.Electrical control system: centralized control is adopted to minimize the use of manual labor. Operators are only responsible for adding consumables and testing products.Ensure the safety of personnel and equipment to the maximum extent, and take measures to prevent and eliminate all potential dangers in the production process

Installation location: indoor

Ambient temperature: 0 ~40 (the equipment should be pre-run when it is started up at a temperature below zero)

Power supply: AC 380V-400V / 220V-240V

Frequency: 50 hz

Protective grounding:< 10 Ω

compressed air Pressure: 0.5 mpa to 0.7 mpa

Air consumption: 0.5m/min

Temperature: 0 ~ 40

l Equipment configuration instructions

Human-machine interface (touch screen): B&T(Switzerland)

Low voltage electrical parts: Schneider

Motor reducer: Taiwan Wanxinbang Philly or other domestic famous brand Inverter : B&T(Switzerland)

Solenoid valve and cylinder:Yadeke

Programmable Logic Controller (PLC):Mitsubishi

Equipment material description

The parts in contact with the material are made of 304 stainless steel.The rest of the carbon steel plastic spray treatment.

Adopts high speed distribution device to pack all kinds of containers,such as flat plastic bottles, round bottles, irregular shaped bottles,glass bottles of various sizes,round bottles, oval bottles, square cans and paper cans, etc.It is also suitable for packing boxes with partition plates.

The bottle is clamped by the bottle clip (with built-in rubber to prevent damage to the bottle body) and put into the open carton. When the head is raised, the carton is discharged and sent to the box sealing machine. This packing machine is controlled by P.L.C touch screen.

There is a bottle alarm stop,no bottle no packing safety device rocker arm packing machine greatly convenient operation and management to reduce production personnel and labor intensity, is the automatic scale production of essential equipment.

According to packing requirements, can automatically wash the product arrangement

1.Novel design, compact structure

2.Applicable to a wide range of products can be used for packing

3.Especially suitable for supporting the use of packaging line, easy to move

3.Computer program control, simple operation, stable movement

4.It is suitable for automatic packing of bottle, box, bag and barrel series

l Specification

Machine type: Single column packing machine

Power supply/power: 220V/380V 50/60HZ 3.5KW

Applicable product: Plastic bottles, Glass bottle;Cans;Soft bag;Carton etc.

Speed: Single head 4-6 boxes/min, Double head 8-12 boxes/min

Air source: 6-7kg

Machine size: 1500*2000*2300mm

l Automatic Sealing machine

l Product introduction

This machine is suitable for product packaging and carton sealing.Applicable to household appliances, textile, food, daily necessities, pharmaceuticals, light industry, chemical industry and other industries.This carton sealing machine can be separate sealing operation.It can also be used with the production line of filling and baling.This machine is the necessary equipment for the packing line.

Technical parameters:

Speed:50 cases /min

Packaging tape width:36, 48, 60(mm）

Minimum carton size:150x90(mm)

Maximum carton size:500x750(mm)

Worktable height:500-750mm

Size: 750x740x1470mm

l Other full automatic box filler machine accessories

1.Stainless steel Bottle conveyor  

2.Motivational Roller conveyor  

3.Anti explosive motor  

4.Automatic deleted residuing machine