Full automatic bottle filling and capping machine-automatic filling machine
1.full automatic piston servo filling machine for viscous liquid
full automatic piston servo filling machine-Servo motor
In the process of modern industrial production activities, flammable and explosive dust, gas or liquid will inevitably be produced or exist, you may not see or even feel their existence, however, once reached a certain amount, it is easy to catch fire or even cause explosions, causing irreparable losses.
High quality explosion-proof motors with appropriate levels of protection can help eliminate these unseen hazards and help create a safe and reliable working environment It integrates decades of experience in explosion-proof design, has a powerful explosion-proof housing, can withstand internal changes without endangering the surrounding environment, has excellent movement performance, outstanding acceleration/deceleration capability and high torque output in a wide speed range, greatly enhanced flexibility. At the same time, it has passed stringent explosion tests and is available in both European (CE) and North American (UL/CUL) safety standards.
1. Full automatic anti corrosive filling machine for chemical liquid
Titanium alloy material filling nozzles for anti corrosive of sodium hypochlorite Chemical liquid.
PVDF material filling nozzles for anti corrosive of acid liquid
1. Full automatic anti explosive filling machine
Full automatic anti explosive filling machine adopt anti exlosive motor
The introduction of anti explosive motor:
1, explosion-proof motor adopts brushless excitation, set up rotating rectifier plate and static excitation cabinet, excitation control system is reliable; Positive polarity slip excitation is accurate, no impact; The excitation system has reliable out-of-step protection and strong restep ability. The circuit design is reasonable, the discharge resistance does not heat in the work; Wide range of excitation current regulation;
2, synchronous machine, AC exciter and rotary rectifier coaxial. The rectifier plate is located between the main motor and the exciter, or placed outside the bearing seat;
3. Meet the requirements of safety-increased explosion-proof motor, adopt a series of reliable measures to prevent spark, arc and dangerous high temperature, and can operate safely in area 2 explosion danger place;
4, explosion-proof motor housing protection grade is IP55;图片
full automatic bottle filling and capping machine-automatic capping machine
1.automatic capping machine for skew bottles
Production capacity: 2000-3000 bottles/hour
Cap size: 20-100mm in diameter
Applicable bottles: plastic bottles
Bottleneck: 30-90 mm
Bottle height: 60-300mm
Motor power: 0.95 kW
Rated voltage: 220 V
Dimensions (length × width × height) : 2000×840×2000 mm
Mass: about 300 kg
2.full automatic capping machine with automatic feeder
its suitable for plastic bottle screw sealing process, its performance is perfect, reliable work, saving manpower.
(1) magnetic clutch type cap to ensure tight cap without damage.
(2) Cap torque is stepless adjustable to ensure the same cap tightening force.
(3) The screw cap die head adopts special inner tooth clamp to ensure that the cap is beautiful and free from scratches, while improving the adaptability of the cap.
(4) adopt the card bottleneck operation mode, to ensure smooth and reliable under high-speed operation state.
3.high speed full automatic capping machine
high speed full automatic capping machine It is mainly composed of rational cap, falling cap, bottle feeding, cap spinning, lifting, conveyor belt, eliminating mechanism and other parts. It controls bottle feeding and cap spinning speed through man-machine interface, which is more than 300 bottles. It has the advantages of strong adaptability to tighten caps of different shapes and good tightness consistency of cap spinning. Its great advantage is that each drive part is controlled by a separate motor, easy to adjust, reliable, other similar products using synchronous belt or sprocket drive mode, easy to damage or screw cap is not tight. Main machine equipped with: cover part: pneumatic distribution for different caps only need to adjust the pressure value of each part, the replacement time is short, the outer diameter of the cap is close (such as the outer diameter of 30-50mm cap) without any adjustment. Falling cover part: the slide way is used to turn over, the upper cover mechanism is controlled by the optical fiber switch, and the bottle sleeve is controlled by the spring to tighten the bottle. Bottle feeding part: the speed of the synchronous belt can be stepless adjusted and set numerically on the man-machine interface directly, with simple and intuitive speed regulation. The speed of the synchronous belt should be adjusted to be consistent with the speed of the production line. Capping part: three groups of capping wheels and capers are adopted. The three groups of capping wheels are controlled by 6 motors with frequency conversion, and can be independently stepless speed regulation, which can be set numerically on man-machine interface directly. Lifting part: automatic lifting to adapt to different production lines, different bottle height, different bottle shape. Conveyor belt part: plastic flat conveyor chain drive, stepless speed regulation through frequency converter, conveyor belt speed and height with the conveyor speed match. Eliminating device: controlled by optical fiber electric eye and electromagnetic induction switch, it can eliminate unqualified products such as cover feeding and no cover.